NO	Part Type	Reference	Quanturm		NO	Part Type	Reference	Quanturm
1	RESISTOR 100 1/4W 1%	R6,R7,R8,R9	4		11	talmi gold jst xh 3pin	JP1	1
2	RESISTOR 510Ω 1/4W 5%	R5	1		12	WIMA MKP2 0.1UF/100V ±5%	C2,C5,C6	3
3	RESISTOR 4K7Ω 1/4W 5%	R1,R2,R3,R4	4		13	Nichicon MUSE KZ 10uF/100V	C1,C3,C4	3
4	BEAD	B1	1		14	TAKAMISAWA RELAY RY5W-K	RELAY1~RELAY6	6
5	diode 1n4007	D1,D2,D3,D4,D5	5		15	Jump	2X4 ide PIN	1
6	ic socket 16pin 30u GOLD	IC1	1		16	High quality 3PIN Terminal blocks b (Plate with gold)	L1,L2,L3,L4,L8,L10,L11	7
7	IC pga-2310	IC1	1		17	Jump Wire	J1,J2,J3,J4,J5,J6	6
8	2*4 ide pin (S)	P3	1		18	2*8 ide pin (L)	P1,P2 or W1,W2    Inserted in the back of PCB	2
9	TRANSISTOR 2SC1815	Q1,Q2,Q3,Q4	4		19	2*8 ide connect holder	P1,P2 or W1,W2    Other one PCB	2
10	TRANSISTOR 2SC1384	Q5	1

　

　

　

　

　

　

Top

---

Jump location of:

For 5.1 channel or 7.1 channel:

FRONT (R+L) channel (J1)	CENTER channel and SUBWOOF channel(J3)
SURR (R+L) channel (J2)	B SURR (R+L) channel (J4)

For balance :

Left channel	Right channel

　

Combination input_output_pga-2310 (DOWN PCB) and input_output_pga-2310 (UP PCB)

　

Substrate assembly after the completion of pga-2310 to insert the other, and so the whole package wiring is completed, confirmed that the situation in the boot IC1 first 12 pin on G = 15V, confirmed IC1 No. 13 pin on the G =- 15V, confirmed IC1 No. 8 pin of the G = 5V , Confirmed later in the shutdown situation will plug pga-2310.